PID controller 32 x 74  mm ATR141

Control and alarm functions, 1 input programmable for different sensors


 

  • <p>industrial temperature controller</p>

This 32x74 controller with a 4-figure display is highly configurable, which means it requires a lower number of product codes. The input can be programmed for  temperature sensors, resistance thermometers and thermocouples,   but also for pressure transmitters, humidity and flow sensors.
The algorithm for hot-cold PID control is optimised both for temperature control and for process control with quick transitory, pressure control and flow control.

The single 4-figure display is optimised for process displays with normalised signals, displays of speed/RPM on inverter, displays of temperature over 1000°C.

The controller's outputs can be selected as command/multiple alarm modes/event. The serial communication option is in RS485 with Modbus/Slave protocol.

User friendly, multimedia support and traceability

For the entire range of Pixsys products we provide technical support for installation, programming and operation via our online forum and via Skype.

The interface of the PIDcontroller ATR141ensures that the product is easy to use and that the user is also supported by auxiliaries for programming such as MEMORY-CARD or the LABSOFTVIEW programming software.

Programming tutorial videos are available on our youtube channel.

As for the entire range of PIXSYS products, thanks to the QR code the traceability of the product is guaranteed for its entire life cycle; the information and documentation online can be also be accessed by reading the QR CODE that directs your mobile device to the product's technical specifications and verifies its warranty conditions.

Ordering codes

ATR141-AD
1 Analogue Input + 2 Relays 8 A + 1 SSR 12Vdc / Supp. 12...24Vac/Vdc
ATR141-B
1 Analogue Input + 2 Relays 8 A + 1 SSR 12VDC / Supp. 230VAC

Main features

Box
32x74 (front panel) x 53 mm
Power supply
12...24 V AC/ DC or 24Vac/115V AC/ 230VAC ±15% 50/60 Hz- (galvanical isolation 2500V, not for AD-ADT)
Consumption
2,6 VA(code AD,ADT) 4,4 VA(code B), 5,7 VA (code C), 2,4 VA (code AV, ADT)
Display
4 digits, 0,4" red + 3 signaling leds
Operating conditions
Temperature 0-45 °C, humidity 35..95 RH% (non condensing)
Material
Box: Polycarbonate; front panel: ABS UL94V0 self-extinguishing
Weight
Approx. 100 g
Sealing
Front panel IP54, Box IP30, Terminal bloks IP20
Quick set-up options
Memory Card with/without battery, software LABSOFTVIEW

Inputs

1 analog
Res. 16 bit, selectable for TC type K, S, R, J, (automatic compensation of the cold junction o..50 °C, ± 0,2% F.S. ± 1 Digit F.S.), thermoresistance PT100, PT500, PT1000, Ni100, PTC1K. NTC10K, (ß 3435K), process signals 0..10V(40000 points), 0/4..20mA (30000points), potentiometer 6KΩ, 150 KΩ (40000 points)
Sampling frequency
66ms (frequency 15 Hz)

Outputs

2 Relays
1 Relay 10A/8A - 250 VAC resistive charge + 1 Relay 5A - 250 VAC resistive charge
1 Digital
8 VDC - 20 mA (codes A/B/C) - 12..35 VDC - 30 mA (code AD)
1 Auxiliary
8 VDC - 20 mA (codes A/B/C) - 12..35 VDC - 30 mA (code AD) for sensor supply
Serial communication
RS485 Modbus RTU - Slave (Code ADT)

Software features

Control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned, Dead band
Tuning
manual or automatic
Operating modes
Visualizer, Single setpoint, Double setpoint (selection by parameter)
Data protection
Lock of control / alarm setpoint - Access to parameters by password
Alarm modes
Absolute / Threshold, band, High / Low deviation. Alarm with optional manual reset.
Double P.I.D.
Heating / Cooling P.I.D.
Open / Close logic
Open / Close logic for motorized valves
Setpoint
2 setpoints

User Manual - Video - Application Notes - Datasheet

Manuale - User Manual ATR121-141 2300.10.056-Rev.E
19/09/2013
Italiano-English
PDF
User Manual ATR121-141 2300.10.058-Rev.D
30/08/2012
Deutsch
PDF
Manual ATR121-141 2300.10.060-Rev.D
30/08/2012
Español
PDF
Video ATR121 calibrazione
12/10/2010
Español
Video Youtube
Video presentazione ATR121
13/01/2011
Italiano
Video Youtube
AN-0020-0311 ATR121-AT con supervisione iMODview
17/01/2011
Italiano
JPG
AN-0024-4110 ATR121 con sonda umidità +°C - EE06
13/10/2010
Italiano-English
JPG
AN-0038-0211 ATR121 con sonda umidità +°C - RH96
13/1/2011
Italiano-English
JPG
Certificate UL ATR121-141-142
01/02/2011
English
JPG

Installation

<p>32x74 mm pid temperature controller size and installation</p>

Size and installation 

<p>connection schema of thermostat atr141 Pixsys srl </p>

Wiring plan