PRODUCTS

ATR236

Temperature Controller, Single setpoint

Controller 48x48mm (1/16 Din), single control loop. Basic temperature controller available in one single ordering code.

Input selectable for different temperature sensors; one relay or SSR output, programmable as command/alarm/event output.  Extended supply range  24....230 Volt ac/dc galvanically isolated.

User-friendly operation, programming tools for quick set-up (MEMORY-CARD, programming and monitoring software LABSOFTVIEW).


Ordering codes

ATR236-ABC
1 Analogue input + 1 Relay 5 A + 1 Ssr - 12Volt

Main features

Box
48x48 (front panel) x 107 mm
Power supply
24...230Vac/dc ±15% 50/60 Hz (galvanic insulation)
Consumption
5,0 VA, 4W
Display
4 digits 0,4" green + 4 digits 0,3" red
Operating conditions
Temperature 0-45 °C, humidity 35..95 uR%
Material
Box: Noryl UL94V1 self-extinguishing, front panel: PC ABS UL94V0 self-extinguishing
Weight
Approx. 165 g
Sealing
IP65 (Front panel) , IP20 (Box and terminal bloks)
Quick set-up options
Memory Card with / without battery, software LABSOFTVIEW, EASY-UP codes

Inputs

1 Configurable
Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K)
Sampling time
4,1 ms (frequency 242 Hz)

Outputs

1 Relay
Relay 5 A - 250 Vac resistive charge
1 SSR
12 Vdc - 30 mA max

Software features

Control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned
Tuning
Manual or automatic
Data protection
Lock of control / alarm setpoint, Access to parameters by password
Alarm modes
Absolute / Threshold, band, high / low deviation. Alarm with optional manual reset
Auto / Man function
Command output percentage
Soft-Start
Rising gradient expressed as Degrees / Hour
_last update 22/02/2012