PL250
PLC 20 Inp / 12 Out
Compact PLC for applications requiring flexibility and cascade control with low/medium number of I/O.
All resources are available in a single device, not involving additional boards: CPU, power supply unit, digital I/O (with relay outputs) , analogue I/O not requiring external signal conditioners. Serial communication via RS485 multi-point and ModbusRTU protocl up to 57000 baud.
Development environment Pixsys PLprog is relying on Ladder programming with function blocks (contacts/coils) integrating countings, timings, PID control algorithms, motion control, mathematical and logical functions 16bit, check on words bit.
Wiring is simplified by extractable terminal blocks. The power supply 12...24 Vac/Vdc enables installation not only on control panels/cabinets but also on trucks/tractors.
Ordering codes
PL250-10AD
PLC with 4 An. Inp. (10 bit) + 12 relays 5A
PL260-11AD
PLC with 4 An. Inp. (16 bit for Tc/RTD) + 12 relays 5A
Main features
Box
Standard DIN43880 160 x 90 x 58 (H) mm with DIN RAIL mounting fitting EN50022
Power supply
12...24Vac/Vdc ±15% 50/60 Hz
Operating conditions
Temperature 0-45 °C, humidity 35..95 uR%
Inputs
Analogue (10bit)
4 inp. 0...10Volt or 2 inp. 0...20mA (code -10AD)
Analogue (16bit)
4 selectable for TC, K, J, S, R, T, E, PT100, Ni100, 0/4..20 mA, 0/1..10 V for more details see technical documentation (code -11AD)
Inputs for Encoders
2 bidirectional encoders (overlapped to 4 inputs PNP) 15 KHz simultaneously / 30KHz single
Auxiliary power supply
Terminal for Encoder power supply 5/12Volt, Terminal for Potentiometer power supply 10,0 Volt
Trimmer
2 for regulations and process variables
Outputs
Digital
12 relay outputs 5A - resistive charge
Analogue
2 0...10Volt , 8 Bit (overlapped to 2 inputs)
Programming port
1 serial RS232 on Plug
Communication port
1 serial RS485 on Plug or on extraible terminal ( max. 57600 Baud)
Software features
Programming
Software Pixsys PLprog, Ladder diagrams; 128 markers (logic relays), 64 bistables, 96 timers 16 bit, 32 up-down counters, mathematical and logic functions, range - rescale, contact bits, 2 timed interrupt (min. 1 ms)
Communication protocols
Modbus RTU master/slave; Free-Port for Modem or proprietary devices
Memory
64Kbyte Flash for programming, non-volatile Ram memory (6months), 1000 words EEprom, optional MMC 13000 words
Clock
Real-Time clock, Back-up battery
Control algorithms
P, PI, PID, PD
_last update 22/02/2012
TRADEMARKS © 2010 PIXSYS Electronics, All rights reserved
