PRODUCTS

PL300

I/O - Data acquisition/actuation module for PLC/HMI

Data acquisition module which can be used either with Pixsys HMI mod. ATR313, TD320, TD240 or with  SCADA systems.

Four configurable analogue inputs combined with relay and analogue outputs make available in each device the capabilities of four process controllers, including PID control.  RS232 and RS485 are both available for serial communication via Modbus RTU - Slave.

Pre-programmed functions can be re-called to simplify the programming and the building of networks (motorized valves control, alarms...). Real-time clock is also provided.


Ordering codes

PL300-10AD
4 An. Inp. + 6 Digital + 12 relays + 2 outputs V/mA
PL300-30AD
4 An. Inp. + 6 Digital + 4 SSR-12Volt + 8 relays + 2 outputs V/mA

Main features

Box
Standard DIN43880 160 x 90 x 58 (H) mm with DIN RAIL mounting fittings EN50022
Power supply
12...24Vac/Vdc ±15% 50/60 Hz
Consumption
10W
Operating conditions
Temperature 0-45 °C, humidity 35..95 uR%
Material
Noryl V0
Weight
Approx. 460 gr
Sealing
IP20 Box

Inputs

Analogue
4 Selectable for TC, K, J, S, R, T, E, PT100,PT1000, Ni100, 0/4..20 mA, 0/1..10 V, 0...50mV
Sampling time
250 ms
Resolution
14 bit
Digital
6 PNP inputs

Outputs

Digital
12 Relays 5A resistive charge
Analogue
2 selectable by Jumper as 0...10Volt or 4...20mA for retransmission or command
Communication ports
1 serial RS232 on plug + 1 serial RS485 on Plug or on extractable terminal (or Current-loop 20mA)

Software features

HMI - Operator interface
ATR313/ATR640 for kilns or environmental chambers, TD240 / TD320 / SCADA for other industrial applications for supervisory/monitoring functions
Communication protocol
Modbus RTU Slave
Analogue inputs control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time-proportioned
Clock
Real-Time clock, Back-up battery
_last update 22/02/2012