ECT / NAT

Pressure transmitter


 

Relative pressure transmitter with thick film on ceramic base technology. Output signal 4...20mA or 0...10Volt. The transmitter can be powered by the Pixsys controller. The steel housing, the 1/4"G or 1/4" NPT thread and the DIN43650-A connector make field installation quick and easy. 

Ideal for use with oleodynamic or hydraulic systems with pressures of up to 100 Bar that require high precision and repeatability. For pressures greater than 100 Bar, the NAT series is recommended as it doesn't use O-ring seals and offers increased resistance to system over-pressure or pressure peaks with a wide range of fluids.

Ordering codes

2000.40.100
ECT1.0A range 0...1 Bar ; 4...20mA
2000.40.101
ECT2.5 range 0...2,5 Bar ; 4...20mA
2000.40.103
ECT6.0A range 0...6 Bar ; 4...20mA
2000.40.104
ECT10.0A range 0...10 Bar ; 4...20mA
2000.40.105
ECT16.0A range 0...16 Bar ; 4...20mA
2000.40.106
ECT25.0A range 0...25 Bar ; 4...20mA
2000.40.107
ECT40.0A range 0...40 Bar ; 4...20mA
2000.40.108
ECT100.0A range 0...100 Bar ; 4...20mA
2000.40.119
ECT-1.3A range -1...3 Bar ; 4...20mA
2000.40.122
ECT-1.0A range -1...0 Bar ; 4...20mA

Ordering codes

2000.40.033
NAT400.0A range 0...400 Bar ; Out. 4...20mA
Available ranges (NAT)
2,5 to 1000 Bar

Main features

Sensor
Thick film on ceramic (Al2/O3)
Output
4...20 mA (options at 0...10Volt)
Power supply
- 9...30Vdc 2 wires connection
Operating temperature
-25...+85°C
Accuracy at 25°C
+/- 0,3% on full scale (typ.)
Electrical connection
DIN43650-A
Process connection
1/4" G
Housing material
AISI316L
EMC emissivity
EN/IEC 61000-6-3/2
Sealing
IP65

User Manual - Video - Application Notes - Datasheet

ECT
16/02/2017
English
PDF
2000.40.033 NAT
25/10/2010
English / Français / Deutsch
PDF