PT100 with transmitter 4..20mA  EASY-UP

Diameter 6mm with DIN head


 

Temperature measurement by resistance thermometers relies on a property common to all conductors and semiconductors, which is the variation in their electrical resistance in relation to temperature change. The PT100 sensor has an ohmic value of 100 at a temperature of 0°C and its variation coefficient is 0.00385 Ohm per degree centigrade.

The technology adapts to meet modern requirements and is designed to provide more precise measurements by using fine sheets of platinum on a ceramic substratum (thin film resistors).

The converter in the head of the probe  converts the signal to 4...20mA in order to transmit the temperature value to the process instruments with a pre-selected scale.

The PT100 Easy-up probes are assigned a numeric code that once inserted allows the Pixsys controllers to automatically set the main operating parameters.

Ordering codes

2000.90.494
BOX-PT100B-6X200-MGO-1/2"/F-DIN/B Transmitter 0..100°C --> 4...20mA

Sliding junction ordering codes

2000.30.003
Sliding junction Ø 6x1/8" GAS
2000.30.006
Sliding junction Ø 6x1/4" GAS
2000.30.027
Sliding junction Ø 6x1/4" NPT
2000.30.009
Sliding junction Ø 6x1/2" GAS

Main features

Stem diameter
6mm
Immersion material
Steel AISI 304 or 316
Internal insulation
MgO Magnesium oxide > 20Mohm @ 25°C (500Vdc)
Sensor
PT100 class B (+/- 0,3°C up to 25°C)
Response time
6,5 seconds according to normative BS 1904/1984/CEI60751
Head
DIN/B aluminium league, red epoxidic painting
Sealing degree
IP66
Operating temperature
-100 ... +500°C
Transmitter
Calibrated at 0...100°C > 4...20mA

User Manual - Video - Application Notes - Datasheet

2000.90.494
19/04/2017
English
PDF

Installation

<p>Size and installation of din head pt100 Pixsys srl </p>

Size and installation