PRODUCTS

TCT101

Timer - Counter - Tachometer - Multi-function device+RS485

TCT101-1ABC settable in 5 different modes: Timer-ON, Timer-OFF, Pause-Work, Oscillator, PWM (time-proportioned output), all options with independent setting of ON-OFF times.

TCT101-2ABC configurable as single/double counter, incremental/decremental counter, optional setting by external potentiometer.

TCT101-3ABC frequency meter for Push-Pull/Line-Driver TTL Encoders, mono- / bi-directional  up to 100kHz.

TCT101-4ABC-T configurable by parameter as Timer /Counter/ Tachometer with serial communication via RS485-ModbusRTU for transmission of setpoints/timings/countings/frequency.


Ordering codes

TCT101-1ABC
Timer - settable in 5 modes
TCT101-2ABC
Counter - incremental or decremental
TCT101-3ABC
Tachometer - for Push-Pull / Line-Driver encoders (mono/bi-directional)
TCT101-4ABC-T
Timer / Counter / Tachometer - with RS485 Modbus RTU/slave serial communication

Main features

Box
32x74 (front panel) x 53 mm
Power supply
24...230Vac/Vdc ±15% 50/60 Hz
Consumption
3 VA
Display
4 digits 0,4" green + 4 digits 0,3" red
Operating conditions
Temperature 0-45 °C, humidity 35..95 RU%
Material
Box: Noryl UL94V1 self-extinguishing; Front panel: PC ABS UL94V0 self-extinguishing
Weight
Approx. 100 g
Sealing
Front panel IP65 (with gasket) , Box IP30, Terminal blocks IP20
Quick set-up options
Memory Card with / without battery

Inputs

3 Digital
Selectable as NPN - PNP - TTL, both high/low/rising edge level
Input I3
Input selection by potentiometer 5/10 KOhm for entering of setpoint value (resolution 1000 points)

Outputs

1/2 Relays
2 Relays 8 A - 250 Vac resistive charge (codes -1/2/3) 1 Relay 8 A - 250 Vac resistive charge (codes -4ABC-T)
Serial communication
RS485 Modbus RTU - Slave (code -4ABC-T)

Software features

Timer input selection
Start, Stop, Hold, Reset, Wait
Ranges
Programmable time bases (sec/100 , sec/10 , sec, min , hours)
Counter input selection
Up, Down, Lock, Hold
Counting frequency
Incremental/Decremental up to 100Khz
Counter functions
Count frequency visualization on red display for Flowmeter function
Tachometer input selection
For mono/bi-directional Push/Pull or Line/Driver encoders up to 100Khz
Tachometer functions
Maximum / Minimum peak
Data protection
Parameters protected by password
_last update 22/02/2012