CNV580 - Modem IIoT

CNV580 is the Pixsys IIoT Modem for remote data monitoring: an all-in-one solution including modem, SIM card, Cloud service, PixsysGuard App as user interface. No additional contracts with service providers are required.  The data traffic pre-loaded on the SIM is estimated to last at least 5 years (depending on the data volume used by the application).

The dimensions of the CNV580 are compact and the functionality is optimised for either stand-alone use or networking via RS485 serial. In the first case, with digital I/Os or via the 4...20mA analogue input, it is possible to collect data from sensors or other devices. In the second case the RS485 serial via Modbus RTU protocol connects the CNV580 with other Pixsys devices equipped with serial and allows reading/writing of selected variables. In both cases push notifications on App for alarms, power status or other events are enabled. 

Installation, activation and control are simple and immediate thanks to the Pixsys Guard App with preset scenarios related to the various devices, with access levels and prerogatives differentiated per user.

  • Dimensions
    36 x 90 x 84 mm - 2 moduls DIN43880
  • Material
    Noryl V0
  • Weight
    Approx. 250 g
  • Sealing
    Box and terminal blocks: IP20
  • Operating conditions
    Temperature 0..45 °C, humidity 35..95 RH%
  • Certifications
    CE

ORDERING CODES

CNV580-LTE-1AD

CNV580-LTE-2AD

Power supply

12..24 V DC ±15%

Power consumption

Typical 2 W - Max 12 W (per start-up UPS)

Analogue inputs

1 x 4...20mA 2 wires (40000 points) ±0,2% F.S

1 x 4...20mA 2 wires (40000 points) ±0,2% F.S

Acquiring time

100 mS

100 mS

Digital inputs

2x PNP galvanic isolation 2,5 kV

2x PNP galvanic isolation 2,5 kV

Digital outputs

1x PNP 24 VDC - 30 mA max

1x PNP 24 VDC - 30 mA max

Relais outputs

-

-

Analogue outputs

-

-

Serial communication

-

1x RS485 (1200..115200 Baud)

Radio module

2G GSM/EDGE 850/ 900/ 1800/ 1900MHz

Certification GSM module

GCF/ CE/ UCRF/ FCC/ Anatel/ FAC/ ICASA

SIM card

Pre-installed on Nano-sim connector, including data traffic , estimated coverage 5 years with App "Pixsys Guard"

Bluethooth 4.0

Channel for the device set-up by APP "Pixsys Guard"

Certification BT module

FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC

  • Push notifications
    Sending Push Notifications on Pixsys Guard App
  • MQTT protocol
    MQTT with Pixsys default formatting and JSON configuration file
  • Communication protocol
    Modbus RTU only for Pixsys devices
big_CNV580_EN
  • CNV580-LTE-1AD
    GATEWAY IoT LTE/4G 2DI 1AI 4-20mA 1DO
  • CNV580-LTE-2AD
    GATEWAY IoT LTE/4G + RS485 Modbus 2DI 1AI 4-20mA 1DO