TCT201 | Timer - Counter - Tachometer 48x48mm

TCT201 is available for different functionalities: Timer, Counter, Tachometer/Frequency counter.

TCT201-1ABC configurable in 5 operating modes: Timer-ON, Timer-OFF, Pause-Work, Oscillator, PWM (proportional time output), all with independent settings of the ON-OFF times.
TCT201-2ABC can be configured as single and double counter, incremental and decremental counter with the option of setting by external potentiometer
TCT201-3ABC frequency counter for Encoder Push-Pull/Line-Driver TTL, mono- or bi-directional up to 100kHz.

Programming is possible by keyboard or by Labsoftview software; Memory Cards are available to duplicate quickly all settings from one device to others.

Main features

Dimensions
48 x 48 x 107 mm
Material
Front panel: Polycarbonate UL94V0, Box: Self-extinguishing polycarbonate
Weight
Approx. 350 g
Sealing
Front panel: IP65, Box and terminal blocks: IP20
Operating conditions
Temperature 0..45 °C, humidity 35..95 RH%
Certifications
CE, UL

Hardware features

ORDERING CODES	TCT201-1ABC	TCT201-2ABC	TCT201-3ABC
Use	Timer	Counter	Tachometer
Power supply	24..230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2,5KV
Power consumption		2 Watt/VA
Display	7 segments LED display: 4 digits 0,40", 4 digits 0,30"
Backup	With rechargeable battery - 60 days autonomy
Analog input potentiometer	1x 5/10 KOhm to set setpoint (resolution 1000 points), overlapped DI 3
Digital inputs	2x selectable as NPN - PNP - TTL, both on high/low level, rising/falling edge 1x selectable as PNP - TTL, both on high/low level, rising/falling edge
Auxiliary output	24VDC - max 30mA (pow. 24VAC), 40mA (pow. 24VDC), 60mA (pow. 110..230VAC) for sensor/encoder power supply
Relays output	2x 8A - 230VAC 1/2HP resistive loadas
Serial communication	-

Software features

Timer input functions
Start, Stop, Hold, Reset, Wait
Ranges
Programmable time basis sec/100, sec/10, sec , min , hours
Data protection
Lock of Command/Alarm Setpoints - Access to parameters by Password
Communication protocols
Modbus RTU

Installation