PID controller 32x74 mm ATR121

Control and alarm functions, 1 input programmable for different sensors


 

  • <p>pid temperature controller</p>
  • <p>side view pid thermostat 32x74 </p>
  • <p>pid temperature controller side view </p>

This 32x74 controller is highly configurable, which means it requires a lower number of product codes. The input can be programmed for  temperature sensors, resistance thermometers and thermocouples,   but also for pressure transmitters, humidity and flow sensors.

The algorithm for heating-cooling PID control is optimised both for temperature control and for process variables with quick transitory, like pressure control and flow control.

The software functions of the ATR121 include the open-close logic for valve control on industrial thermoregulation, air conditioning, dosing systems.

The controller's outputs can be selected as command/multiple alarm modes/event. The serial communication option is RS485 with Modbus/Slave protocol.

User friendly, multimedia support and traceability

For the entire range of Pixsys products we provide technical support for installation, programming and operation via our online forum and via Skype.

The interface of the PID controller ATR121 ensures that the product is easy to use and that the user is also supported by auxiliaries for programming such as MEMORY-CARD or the LABSOFTVIEW programming software.

Programming tutorial videos are available on our youtube channel.

As for the entire range of PIXSYS products, thanks to the QR code the traceability of the product is guaranteed for its entire life cycle; the information and documentation online can be also be accessed by reading the QR CODE that directs your mobile device to the product's technical specifications and verifies its warranty conditions.

Ordering codes

ATR121-AD
1 Analogue Input + 2 Relays 8 A + 1 SSR 12Vdc / Supp. 12...24Vac/Vdc
ATR121-B
1 Analogue Input + 2 Relays 8 A + 1 SSR 12Vdc / Supp. 230Vac
ATR121-ADT
1 Analogue Input + 1 Relay 8 A + 1 SSR 12Vdc + RS485 Modbus RTU Slave / Supp. 12...24Vac/Vdc

Main features

Box
32x74 (front panel) x 53 mm
Power supply
12...24 Vac/Vdc or 24Vac/115Vac/230Vac ±15% 50/60 Hz- (galvanical isolation 2500V, not for AD-ADT)
Consumption
2,6 VA(code AD,ADT) 4,4 VA(code B), 5,7 VA (code C), 2,4 VA (code AV, ADT)
Display
3 digits, 0,56" red + 3 signaling leds
Operating conditions
Temperature 0-45 °C, humidity 35..95 RH% (non condensing)
Material
Box: Polycarbonate; front panel: ABS UL94V0 self-extinguishing
Weight
Approx. 100 g
Sealing
Front panel IP54, Box IP30, Terminal blocks IP20
Quick set-up options
Memory Card with/without battery, software LABSOFTVIEW

Inputs

1 analogue
Res. 16 bit, selectable for TC type K, S, R, J, (automatic compensation of the cold junction o..50 °C, ± 0,2% F.S. ± 1 Digit F.S.), thermoresistance PT100, PT500, PT1000, Ni100, PTC1K. NTC10K, (ß 3435K), process signals 0..10V(40000 points), 0/4..20mA (30000points), potentiometer 6KΩ, 150 KΩ (40000 points)
Sampling frequency
66ms (frequency 15 Hz)

Outputs

2 Relays
1 Relay 10A/8A - 250 VAC resistive charge + 1 Relay 5A - 250 VAC resistive charge
1 Digital
8 VDC - 20 mA (codes A/B/C) - 12..35 VDC - 30 mA (code AD)
1 Auxiliary
8 VDC - 20 mA (codes A/B/C) - 12..35 VDC - 30 mA (code AD) for sensor supply
Serial communication
RS485 Modbus RTU - Slave (Code ADT)

Software features

Control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned, Dead band
Tuning
manual or automatic
Operating modes
Visualizer, Single setpoint, Double setpoint (selection by parameter)
Data protection
Lock of control / alarm setpoint - Access to parameters by password
Alarm modes
Absolute / Threshold, band, High / Low deviation. Alarm with optional manual reset.
Double P.I.D.
Heating / Cooling P.I.D.
Open / Close logic
Open / Close logic for motorized valves
Setpoint
2 setpoints

User Manual - Video - Application Notes - Datasheet

User Manual ATR121 2300.10.056 revL
02/12/2020
English - Italian
PDF
User Manual ATR121-141 2300.10.058-Rev.D
30/08/2012
Deutsch
PDF
Manual ATR121-141 2300.10.060-Rev.D
30/08/2012
Español
PDF
File modello/model 3D (PDF 3D - .STP)
11/09/2013
Italiano / English
PDF 3D - STEP (.stp)
ATR121 presentation video
09/09/2019
English
Video Youtube
Video ATR121 calibraciòn
12/10/2010
Español
Video Youtube
Video presentazione ATR121
13/01/2011
Italiano
Video Youtube
AN-0020-0311 ATR121-AT con supervisione iMODview
17/01/2011
Italiano
JPG
AN-0024-4110 ATR121 con sonda umidità +°C - EE06
13/10/2010
Italiano-English
JPG
AN-0038-0211 ATR121 with humidity sensor +°C - RH96
13/1/2011
Italiano-English
JPG
Certificate UL ATR121-141-142
01/02/2011
English
JPG

Installation

<p>Programmable temperature controller size and installation</p>

Size and installation

<p>pid controller temperature wiring plan </p>

Wiring plan