Infrared sensor PC | fixed emissivity

The PyroCouple infrared sensors are compact, cost-effective, general-purpose measurement solutions , suitable for non reflective/non metal surfaces  with a measuring range -20...500°C.

A choice of optics is available to fit dimensions of target spot and distance from sensing head. 

Ideally complemented by any Pixsys ATR/DRR controller with simple two-wires 4-20mA wiring.

ORDERING CODES

PC21

PC151

PC301

PCCF

Measuring range

-20...100°C (-LT) / 0...250°C (-MT) / 0....500°C (-HT)

Accuracy @ 25°C

1% of FS reading or +/- 1°C

Repeatability

± 0.5 % of reading or ± 0.5°C, whichever greater

Emissivity

fixed 0,95

 

Optical resolution

2:1

15:1

30:1

Close Focus

Response time

240 mS

Operating temperature

0..70 °C

Analogue output

4..20 mA / mV (thermocouple K, J)

Power supply

2-Wire Connection - 6...28 V DC

Dimensions

103 x 18 mm

Material

Stainless Steel

Sealing

IP65

Certifications

CE

  • 2000.20.018
    PC21MT-0 INFRARED SENS. SPOT 2:1 optics 0 to 250°C 4-20mA Cavo 1mt
  • 2000.20.043
    PC21LT-0 INFRARED SENS. SPOT 2:1 optics -20 to 100°C range 4-20mA
  • 2000.20.019
    PC151MT-0 INFRARED SENS. SPOT 15:1 optics 0 to 250°C 4-20mA Cable 1mt
  • 2000.20.022
    PC151HT-0 INFRARED SENS. SPOT 15:1 optics 0 to 500°C range 4-20mA
  • 2000.20.033
    PC151LT-0 INFRARED SENS. SPOT 15:1 optics -20 to 100°C range 4-20mA
  • 2000.20.021
    PC301HT-0 INFRARED SENS. SPOT 30:1 optics 0 to 500°C range 4-20mA
  • 2000.20.024
    PC301MT-0 INFRARED SENS. SPOT 30:1 optics 0 to 250°C range 4-20mA