CNV510

Protocol converters


 

Pixsys CNV510 protocol converters enable communication between networks relying on different communication protocols. CNV510 allow to interface devices equipped with Modbus RTU protocol on RS485 or CANOpen with communication systems based on the standards Siemens ProfibusDP and Profinet protocols.

Specifically protocol converter models equipped with serial port RS485 allow to integrate Pixsys controllers, I/O modules, PLCs and HMIs into existing or new Siemens networks.

The programming software of the converters (available in the Pixsys Download area) allows to create automatically the configuration in .GSD file format, for an easy importation of Pixsys devices into the Siemens development environments TiA Portal and Step7.
 
The configuration software may be downloaded free of charge using the "DOWNLOAD AREA" , see section CNV510 Software.

Ordering codes

CNV510-PBUS-RTU-A
Protocol converter Profibus DP - Modbus RTU (Software Version: SW67561)
CNV510-PBUS-CAN-A
Protocol converter Profibus DP - CANOpen (Software Version: SW67551)
CNV510-PNET-CAN-A
Protocol converter Profinet - CANOpen (Software Version: SW67607)
CNV510-PNET-RTU-A
Protocol converter Profinet - Modbus RTU (Software Version: SW67602)

Technical data

Enclosure
DIN43880 – 71x90x64mm
Power supply
12..24 V DC +/- 15%
Consumption
3 W
Operating conditions
Temperature 0-45 °C, Humidity 35..95 uR%
Material
Noryl V0
Weight
250 g
Sealing
IP20 (enclosure)
Terminal block
extractable

User Manual - Video - Application Notes - Datasheet

User manual/Manuale CNV510-PNET-RTU-A 2300.10.296
27/05/2019
English
PDF
Manuale / User manual CNV510-PBUS-RTU-A 2300.10.294
08/04/2019
English
PDF

Installation

Dimensions and installation