ATR171 is a PID controller with dual 4-digit displays that can be programmed for different applications in industrial environment.
One analog input is programmable for both temperature sensors and V/mA process signals. The optional second input is programmable only for temperature sensors for differential control applications.
Outputs are selectable as command, multiple alarm modes or analog retransmission.
Serial communication option is in RS485 with Modbus RTU/Slave protocol.
It is provided with extended range power supply from 24 to 230V AC/DC with galvanic isolation.
Digital input allows external activation of various functions, including Timer mode.
- Dimensions72 x 72 x 99 mm
- MaterialBox: PC UL94V2 self-extinguishing, Front panel: PC UL94V2
- WeightApprox. 250 g
- SealingFront panel: IP54 (IP65 with sealing), Box IP30 and terminal blocks IP20
- Operating conditionsTemperature 0-45 °C, humidity 35..95 RH% (non-condensing)
- CertificationsCE, UL
| ORDERING CODES | ATR171-11ABC | ATR171-12ABC | ATR171-14ABC | ATR171-23ABC-T |
|---|---|---|---|---|
| Power supply | 24..230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2,5KV | |||
| Power consumption | 6 Watt/VA | |||
| Display | Green display 4 digits 0,56 , red 4 digits 0,3" e 6 signaling leds | |||
| Analogue inputs | 1x Ris. 16bit, programmable for thermocouples K, J, S, R (automatic compensation of cold junction 0..50°C, precisione @25°C ±0,2% F.S. or ±1 digit), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), Process signals 0/4..20mA (40000 points), 0..10V (54000 points), 0..40mV (16000 points), Potentiometers F.S. 6/150Kohm (50000 points). | 1x Ris. 16bit, programmable for thermocouples K, J, S, R (automatic compensation of cold junction 0..50°C, precision @25°C ±0,2% F.S. oppure ±1 digit), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), Process signals 0/4..20mA (40000 points), 0..10V (54000 points), 0..40mV (16000 points), Potentiometers F.S. 6/150Kohm (50000 points). 1x Ris. 16bit, programmable for thermocouples K, J, S, R (automatic compensation of cold junction 0..50°C, precision @25°C ±0,2% F.S. or ±1 digit), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K) | ||
| Sampling time | Programmable up to 4,1 ms (frequency from 4,12Hz up to 242Hz) | |||
| Digital inputs | 1 x PNP | 1 x PNP | 1 x PNP | - |
| Digital / analogue input | - | - | - | 1 x Digital PNP 12VDC - 30mA o 4..20 mA (40000 points ± 0,2% F.S.) o 0..10 V DC (40000 points± 0,2% F.S.) |
| Relais output | 1 x 8A - 250VAC resistive loads | 2 x 8A - 250VAC resistive loads | 3 x 8A - 250VAC resistive loads 1 x 5A - 30V resistive loads | 3 x 8A - 250VAC resistive loads |
| Serial communication | - | - | - | RS485 (1200..115200 Baud) galvanically isolated |
- Control algorithmsON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportional
- TuningManual or automatic
- Alarm modeAbsolute / Threshold, Band, High / Low deviation. Alarm with optional Manual reset. Loop Break Alarm
- Double P.I.D.Heating / Cooling with double P.I.D.
- Soft-StartRising gradient expressed as Degrees / Hour
- Open / Close logicOpen / Close logic for motorized valves
- Software parameter configurationMemory Card, software MyPixsysLab, codici EASY-UP
- Data protectionLock of Command / Alarm Setpoints - Access to parameters by password
- Communication protocolsRS485 Modbus RTU - Slave (23ABC-T model, overlapped to the analogue input AI2)
- ATR171-11ABCDOUBLE SETPOINT CONTROLLER 72X72 4+4 Digit 1 AI-1 RL-SSR-24/220V
- ATR171-12ABCTRIPLE SETPOINT CONTROLLER 72X72 4+4 Digit 1 AI-2 RL-SSR-24/220V
- ATR171-14ABCFOUR SETPOINT CONTROLLER 72X72 4+4 Digit 1 AI-4 RL-24/220V
- ATR171-23ABC-TFOUR SETPOINT CONTROLLER 72X72 4+4 Digit 3 RL+1V/mA-SSR-RS485-24/220V
