STR551 | Indicator -Panel meter 96x48

Indicator / panel meter STR551 is designed for process acquisition and retransmission via analogue output.

The monochrome OLED graphical display supports process trend displays with programmable sampling time and bar-graph representation with thresholds typically used for level, flow and dosage measurements.

Analogue input is configurable by parameter for a wide range of temperature sensors and process signals in mA and volts. Linearization is customizable up to a maximum of 16 points, useful on irregularly profiled tanks.

Process-related mathematical functions such as Totalizer and Sum are also implemented.

Connectivity is provided by standard RS485 with Modbus RTU/Slave protocol.

STR551 interface is also quickly configurable via NFC with MyPixsys APP, without the need to power up the instrument or via multi-language text menus from the frontal keypad

Main features

Dimensions
96x48 (Front panel) x 48 mm (1/8Din)
Material
Box: polycarbonate V0. Front cover: silicone rubber
Weight
Approx. 165 g
Sealing
Front panel: IP54, Box and terminal blocks: IP20
Operating conditions
Temperature 0..45 °C, humidity 35..95 RH%, max altitude 2000m
Certifications
CE, UL

Hardware features

ORDERING CODES	STR551-12ABC-T128R
Power supply	24..230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2,5KV
Power consumption	8 Watt/Va
Display	2.42" monochrome (yellow) OLED graphic display, 128 x 64
Analogue inputs	1 x Ris. 16bit, programmable for thermocouples K, S, R, J, T, E, N, B (automatic compensation of the cold junction -25..85°C, Toll. @25°±0,2% F.S. ±1 digit F.S.), Thermoresistances PT100, PT500, PT1000, Ni100, Ni120, PTC 1K, NTC 10K (β 3435K e β3694K), NTC 2252 (β3976K) , process signals 0..1/5/10 V (50000 points), 0/4..20mA (40000 points), 0..60 mV (25000 points), Potentiometer 1..150 KΩ (50000 points). Impedance: 0-10 V: Ri>110 KΩ 0-20 mA: Ri<5 Ω 0-40 mV: Ri>1 MΩ
Sampling time	Programmable up to 4,1 mS (frequency up to 242 Hz)
Digital input	2x PNP
Analogue outputs	1x 0..10V (60000 points) 1x 0/4..20mA (60000 points)
Digital Outputs	-
Auxiliary Output	12/24 VDC - 25mA max for sensor power supply
Relais Outputs	2x 2 A - 250 V AC resistive load
Serial communication	RS485 (1200..115200 Baud) galvanically isolated
USB	1x micro USB for programming via PC with MyPixsysLab

Software features

Alarms regulation
ON - OFF with hysteresis
Alarm mode
Absolute / Threshold, Band with instantaneous/delayed/retentive/by digital input activation, Sensor failure / Activation by serial line
Sum Function
Sum different process measurements over time By digital input or by keyboard
Totalizer Function
Visualisation of instant process value and total value since last reset
Latch-on function
Semi-automatic setting of limits/ calibration values for analogue inputs
Graphic function
Trend display with time base settable from 1sec to 3600sec total 4K memory words
Measure unit visualization
Selection of different measuring units
Multilingual menu
English/Italian/German/French/Spanish
Analogue retransmission
Retransmission of process values / setpoints to analogue outputs
Software parameter configuration
Memory Card, software MyPixsysLab, codici EASY-UP - Programming via APP (NFC) "MyPixsys" for Android and iOS devices
Software protections
Command setpoints / alarms - Password for parameter access
Communication protocols
Modbus RTU