PL300
I/O Acquisition/actuation module for PLC/HMI
Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal input and a wide range of outputs, both analogue for ritransmission and control and relay for actuation on systems with alternating current. On a single Plug type connector and on extractable terminals there is an RS232 port and an RS482 port, both with Modbus RTU - Slave protocol.
To simplify the logic on the network nodes, the device can retrieve pre-programmed functions for servo-valve control and management of alarms or input analogics, as well as the clock function with back-up.
PLC tutorial - English
Ordering codes
PL300-10AD
4 An. Inp. + 6 Digital + 12 relays + 2 outputs V/mA
PL300-30AD
4 An. Inp. + 6 Digital + 4 SSR-12Volt + 8 relays + 2 outputs V/mA
Main features
Box
Standard DIN43880 160 x 90 x 58 (H) mm with DIN RAIL mounting fittings EN50022
Power supply
12...24Vac/Vdc ±15% 50/60 Hz
Consumption
10W
Operating conditions
Temperature 0-45 °C, humidity 35..95 uR% (non condensing)
Material
Noryl V0
Weight
Approx. 460 gr
Sealing
IP20 Box
Inputs
Analogue
4 Selectable for TC, K, J, S, R, T, E, PT100,PT1000, Ni100, 0/4..20 mA, 0/1..10 V, 0...50mV
Sampling time
250 ms
Resolution
14 bit
Digital
6 PNP inputs
Outputs
Digital
12 Relays 5A resistive charge
Analogue
2 selectable by Jumper as 0...10Volt or 4...20mA for retransmission or command
Communication ports
1 serial RS232 on plug + 1 serial RS485 on Plug or on extractable terminal (or Current-loop 20mA)
Software features
HMI - Operator interface
ATR313/ATR640 for kilns or environmental chambers, TD240 / TD320 / SCADA for other industrial applications for supervisory/monitoring functions
Communication protocol
Modbus RTU Slave
Analogue inputs control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time-proportioned
Clock
Real-Time clock, Back-up battery