Download area
My device

PID Temperature Controller 48x48 mm ATR227

Control and alarm functions, optional Burst-firing and Phase Angle control, multi-voltage power  supply 

Temperature controller 48x48mm (1/16 DIN), Single process setpoint value, double alarm threshold (example: maximum temperature threshold and minimum temperature threshold).

Input is programmable for different types of temperature sensor RTD/Thermocouple and process, Relay and SSR outputs are available. It features also the extended range power supply 24 to 230V AC/DC with galvanic isolation.

The software functions include SSR Burst-firing and Phase Angle control for monophase inductive and resistive loads or infrared lamps (code -12ABC).

The digital input allows external activation of various functions, including selection of automatic/manual mode.

 

User friendly, multimedia support and traceability

For the entire range of Pixsys products we provide technical support for installation, programming and operation via our online forum and via Skype.

The interface of the ATR227 thermoregulator ensures that the product is easy to use and that the user is also supported by auxiliaries for programming such as MEMORY-CARD or the LABSOFTVIEW programming software.

Programming tutorial videos are available on our youtube channel.

As for the entire range of PIXSYS products, thanks to the QR code the traceability of the product is guaranteed for its entire life cycle ; the information and documentation online can be also be accessed by reading the QR CODE that directs your mobile device to the product's technical specifications and verifies its warranty conditions.

Ordering codes

ATR227-11ABC
2 relays + 1 Digital PNP + D.I.

Main features

Box
48x48 (front panel) x 90 mm
Power supply
24..230V AC/DC ±15% 50/60 Hz (galvanical isolation 2500V)
Power consumption
5,5VA
Display
4 digits 0,4" green + 4 digits 0,3" red
Operating conditions
Temperature 0-45 °C, humidity 35..95 RH%
Material
Box: Polycarbonate self-extinguishing. Front panel: ABS UL94V0 self-extinguishing
Weight
Approx. 130 g
Sealing
IP65 (Front Panel) , IP20 (Box and terminal bloks)
Quick set-up options
Memory Card microUSB, software LabSoftView, EASY-UP codes

Inputs

1 Configurable
Res. 16bit, selectable for K, J, S, R, T, E, N, B (automatic compensation of the cold junction 0..50 °C, ± 0,2% F.S. ± 1 Digit F.S.), thermoresistance PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), process signals 0/4..20mA (25000 points), 0..10V (22000 points), 0..60mV (16000 points), potentiometer F.S. 6/150Kohm (50000 points).
Sampling time/ Resolution
100 ms (frequency 10 Hz)
1 digital input
1 PNP, PNP, 1/2 setpoint selection , Run, Auto/man regulation, tuning start, exchange Heat / Cool control , reset outputs

Outputs

2 Relays
Relay 2A - 250 V AC resistive charge
1 Digital
PNP 12VDC - max 30 mA, synchronized with main power supply for optional Burst Firing/Phase angle (code 12ABC)

Software features

Control algorithms
ON-OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned
Output control
Phase angle, burst firing and advanced burst firing control
Tuning
Manual o automatic
Data protection
Lock of control / alarm setpoint, access to parameters by password
Alarm modes
Absolute / Threshold, band, high / low deviation. Alarm with optional manual reset
Auto/ Man function
Command output percentage
Soft-Start
Rising gradient expressed as Degrees / Hour

User Manual - Video - Application Notes - Datasheet

User manual ATR227 - revD
30/04/2020
English - Italian
PDF
enter
VCP Driver Pixsys Controller
17/10/2014
Italiano-English
ZIP
enter
File dxf
16/11/2022
--
.dxf
enter

Installation

<p>Thermoregulator pid ATR227 </p>

Size and installation

<p>Wiring plan of thermoregulator 48X48  ATR227</p>

Wiring plan